BV and no CD?
Invisigoth:
Quote from: Bain on 2007 September 08, 22:32:41
Use Y.A.S.U v1.4.7080, that's what I'm using with BV
As I mentioned in my previous post that won't work if you don't have daemon tools pro. I am using a older version on purpose. I tried 1.4.7 and even downloaded d-tools pro and it STILL wouldn't work without a nocd crack. Trust me, I tried *everything*. This was the only thing that worked for me. Actually, a bunch of people on the site have only gotten it to work this way. And the error that jsalemi reported about a security module was the same error that I got (even with 1.4.7), so I bet he has the same problem that I had.
Quote from: jsalemi on 2007 September 08, 22:22:41
Hmm, ok. Did EAxis change the type of anti-copy they use? Something other than Safedisk now?
I made a mds/mdf image, as I usually do. Maybe the image is bad.
No matter, I'll start it with the CD for now, and then make another image before I call it a night. Thanks for the no-cd crack!
They have beefed up their copy protection. They are using secu-rom now. I have d-tools set up to emulate securom. At first I thought that my image was borked too, but I remade it twice from the CD and torrented two other ones. With all four image files I had the same problem and the same error message. This isn't the first time that I've set up an image for a TS2 EP. I also did it with Seasons and it worked fine with just YASU+Daemon Tools.
Edited because I apparently don't pay attention to sigs.
jsalemi:
Quote from: Invisigoth on 2007 September 08, 22:58:36
And the error that jsalemi reported about a security module was the same error that I got (even with 1.4.7), so I bet she has the same problem that I had.
...
They have beefed up their copy protection. They are using secu-rom now. I have d-tools set up to emulate securom. At first I thought that my image was borked too, but I remade it twice from the CD and torrented two other ones. With all four image files I had the same problem and the same error message. This isn't the first time that I've set up an image for a TS2 EP. I also did it with Seasons and it worked fine with just YASU+Daemon Tools.
Does not the '---joe' in my signature maybe give away that 'she' is a 'he'? :)
Ah, I have Alcohol set to do a Safedisc burn -- I'll have to try making a Secu-rom burn. But I will try the no-cd crack (thanks!) and YASU.
dizzy:
Quote from: Invisigoth on 2007 September 08, 22:58:36
As I mentioned in my previous post that won't work if you don't have daemon tools pro. I am using a older version on purpose. I tried 1.4.7 and even downloaded d-tools pro and it STILL wouldn't work without a nocd crack. Trust me, I tried *everything*. This was the only thing that worked for me. Actually, a bunch of people on the site have only gotten it to work this way. And the error that jsalemi reported about a security module was the same error that I got (even with 1.4.7), so I bet she has the same problem that I had.
I'm using DT 4.09.1 and Yasu 1-4-7080. The only problem I ran into is that you have to install YASU.exe into the DT program files folder.
Invisigoth:
Quote from: dizzy on 2007 September 08, 23:14:44
Quote from: Invisigoth on 2007 September 08, 22:58:36
As I mentioned in my previous post that won't work if you don't have daemon tools pro. I am using a older version on purpose. I tried 1.4.7 and even downloaded d-tools pro and it STILL wouldn't work without a nocd crack. Trust me, I tried *everything*. This was the only thing that worked for me. Actually, a bunch of people on the site have only gotten it to work this way. And the error that jsalemi reported about a security module was the same error that I got (even with 1.4.7), so I bet she has the same problem that I had.
I'm using DT 4.09.1 and Yasu 1-4-7080. The only problem I ran into is that you have to install YASU.exe into the DT program files folder.
Yasu 1.4.7080 summarily rejected my attempts to run even within the d-tools folder. A message popped up saying "Cannot find DaemonToolsPro.dll".
jsalemi:
YASU alone still didn't work, but with the no-cd crack, it launched fine now. I'll have to play with it some more. FWIW, I'm running DT 4.10 lite.
Navigation
[0] Message Index
[#] Next page
[*] Previous page